- This topic has 10 replies, 1 voice, and was last updated 7 months ago by Saf.
13 March 2018 at 9:10 pm #129791Nathan williamsGuest
So I got a Citroen C4 Grand Picasso in Feb 16 and have had nothing but problems. 6 months ago I had engine stop lights come on went to garage, knackered turbo caused by old oil turning to coal in the engine, was advised at the time to scrap it as the problem would just reoccur, unfortunately I needed the car so paid to fix it and hoped to make it to the halfway point so I could VT.
I was literally 1 week away from making the call and sending a letter when the fault light has come back on I haven’t driven it since.
Can’t afford to fix it again but desperately need a car as I have 2 young children
Is there anything I can do ????
14 March 2018 at 12:07 pm #129814Stuart MassonKeymaster
Hi Nathan. To VT the car, it has to be in good working order, with no “damage beyond normal wear and tear”. So if the engine’s broken, you can’t VT it (or at least, you can but the finance company will send you a very large bill for the broken engine).
For more information, have a read of our guide to voluntary termination.
14 March 2018 at 7:07 pm #129820NathanGuest
That’s what I figured,
Because the garage I took it too said it would keep happening and it’s not worth the cost of a new engine,
I could try and fix it on the cheap get it working and hand it back but I know any future owner would probably end up with the car unaware of the problem,
Or do I inform the finance company of the problem and see what they say
Don’t want to risk them refusing go take it back if they know it’s cream crackered
22 December 2018 at 2:28 pm #148659Mickey PowellGuest
Help my 2012 citroen c4 grand picasso semi/auto stays in nutral cannot select any gears auto or manual
13 January 2019 at 4:36 pm #150379Tony WorrallGuest
Hi i have a c4 and sumtimes wen a go to it the back air suspension is flat on the floor any idea
25 January 2019 at 11:20 am #151271TimGuest
Your rear air suspension springs have a leak. It is about £500 to repair at the main dealer if the compressor is ok. If you keep running the car for months on end like this you will fail the compressor as well which will add about £800 to the bill.
I bought a pair of airbags from Amazon (they were posted from Germany) for £100 and watched a youtube video by a Czech guy who replaced his in his garage at home. It took me an hour outside my house and no more problems since.
19 February 2019 at 7:56 pm #152713terry daviesGuest
c4 picasso 2014 tailgate splitting both sides at top by the water drain edge there is no damage not hit or forced all panels fit as they should citreon have agreed there is a problem but will only pay part of cost to replace and dealer want £600+ as my share for something not my fault any help would be grateful
27 February 2019 at 5:14 pm #153202Anthony McGrathGuest
i have c4 picasso 2007 heater blower has stopped working. no fuse listed. windscreen drains clear. motor ok resistor does NOT have a live feed to it.ANY IDEAS PLEASE
29 May 2019 at 11:22 am #169561DiegoGuest
I bought a citroen C4 grand Picasso 2018 and I would like it’s ok when I stop and take my leg from the clutch the engine stop but when I press again the engine start again
4 July 2019 at 5:47 pm #171555Stephen BainesGuest
I have a 2014 Grand Picasso HDI Blue. it has 130000mls and has been serviced impeccably throughout. Cam belt and water pump replaced at 110000.
My wife was dropping the kids off when suddenly the temp warning came on, lcd display went bright red and she was told to stop. RAC came out said water pump had gone. no water in coolant system. Towed to local garage who said not water pump but thought header tank and cap needed replacement. Replaced but not solved. now they’ve changed the thermostat. still not solved. tomorrow they’re taking the pump out but they’re now sugesting it could be a head gasket.
symptoms now are that its runs fine until your give it gas, then the temperature rockets, take foot off the gas and temperature drops.
Anyone else have this issue or know what it could be?
28 October 2019 at 2:02 pm #182802SafGuest
Has anyone had a failure whilst programming a gearbox has anyone got suggestions for it ?
It went to learn the gear grid then it failed !